Windshield Washer Spray Nozzle: Adjustments
ADJUSTMENT1. ADJUST WASHER NOZZLE SUB-ASSEMBLY
a. Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
NOTE: Be careful not to damage the windshield.
HINT: Tape the screwdriver tip before use.
b. Disconnect the washer nozzle sub-assembly from the washer hose.
NOTE: Washer nozzles cannot be reused
c. Select a washer nozzle sub-assembly so that the washer fluid spray area is within the standard.
d. Connect the selected washer nozzle sub-assembly to the washer hose.
e. Engage the 2 claws and install the washer nozzle sub-assembly.