Without Scan Tool

DTC CLEAR (WHEN USING SST CHECK WIRE)

Clear the DTC




1. Using SST, connect terminals TC and CG of the DLC3.
SST 09843-18040

2. Turn the engine switch on (IG).




3. Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.
4. Check that the multi-information display indicates the normal system code.
5. Remove the SST from the terminals of the DLC3.

HINT: Clearing the DTCs cannot be performed by removing the battery cable or the ECU-IG LH fuse.

END OF DTC CLEAR

a. Turn the engine switch on (IG).
b. Check that the ABS warning light illuminates and turn off after the engine starts.