Name Plate

NAME PLATE

Name Plate:

REMOVAL

HINT: When removing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.





NOTICE: Do not heat the vehicle body, emblem and name plate excessively.

1. REMOVE SYMBOL EMBLEM





a. Put protective tape around the emblem.
b. Insert a piano wire between the vehicle body and emblem.
c. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
d. Pull the piano wire and scrape off the double-sided tape that holds the moulding to the vehicle body.

NOTICE: Be careful not to damage the vehicle body.

e. Remove the emblem.

2. REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE





a. Put protective tape around the name plate.
b. Insert a piano wire between the vehicle body and name plate.
c. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
d. Pull the piano wire and scrape off the double-sided tape that holds the moulding to the vehicle body.

NOTICE: Be careful not to damage the vehicle body.

e. Remove the name plate.

3. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE





a. Put protective tape around the name plate.
b. Insert a piano wire between the vehicle body and name plate.
c. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
d. Pull the piano wire and scrape off the double-sided tape that holds the moulding to the vehicle body.

NOTICE: Be careful not to damage the vehicle body.

e. Remove the name plate.

INSTALLATION

HINT: When installing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.





NOTICE: Do not heat the vehicle body, emblem and name plate excessively.

1. INSTALL SYMBOL EMBLEM
a. Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.
2. Remove the double-sided tape from the vehicle body.
3. Wipe off any tape adhesive residue with cleaner.

b. Install the emblem.
1. Using a heat light, heat the vehicle body and emblem.
2. Remove the peeling paper from the face of the emblem.

NOTICE: After removing the peeling paper, keep the exposed adhesive free from foreign matter.

3. Install the emblem.

2. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
a. Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.
2. Remove the double-sided tape from the vehicle body.
3. Wipe off any tape adhesive residue with cleaner.





b. Install the name plate.
1. Using a heat light, heat the vehicle body and emblem.
2. Remove the peeling paper from the face of the emblem.
3. Align the application sheet as shown in the illustration, and install the emblem.
4. Remove the application sheet.

3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
a. Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.
2. Remove the double-sided tape from the vehicle body.
3. Wipe off any tape adhesive residue with cleaner.

b. Install the emblem.
1. Using a heat light, heat the vehicle body and emblem.
2. Remove the peeling paper from the face of the emblem.
3. Align the application sheet as shown in the illustration, and install the emblem.
4. Remove the application sheet.