Removal and Replacement

Fog Light Assembly:

Fog Light Assembly:

FOG LIGHT ASSEMBLY

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH
2. REMOVE ENGINE ROOM SIDE COVER
3. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY
4. REMOVE COOL AIR INTAKE DUCT SEAL
5. REMOVE FRONT FENDER WHEEL OPENING MOULDING LH
6. REMOVE FRONT FENDER WHEEL OPENING MOULDING RH
7. REMOVE RADIATOR GRILLE ASSEMBLY
8. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
9. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
10. REMOVE FRONT BUMPER COVER




11. REMOVE FOG LIGHT ASSEMBLY LH
a. Disconnect the clamp.
b. Remove the 2 bolts and fog light LH.

INSTALLATION




1. INSTALL FOG LIGHT ASSEMBLY LH
a. Install the fog light LH with the 2 bolts.
b. Connect the clamp.

2. INSTALL FRONT BUMPER COVER
3. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
5. INSTALL RADIATOR GRILLE ASSEMBLY
6. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH
7. INSTALL FRONT FENDER WHEEL OPENING MOULDING RH
8. INSTALL COOL AIR INTAKE DUCT SEAL
9. INSTALL AIR CLEANER INLET COVER
10. INSTALL ENGINE ROOM SIDE COVER LH
11. INSTALL ENGINE ROOM SIDE COVER
12. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT
13. PREPARATION FOR FOG LIGHT AIMING
14. FOG LIGHT AIMING INSPECTION
15. FOG LIGHT AIMING ADJUSTMENT