Low Pitched Horn

Low Pitched Horn:

LOW PITCHED HORN

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH
2. REMOVE ENGINE ROOM SIDE COVER RH
3. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY
4. REMOVE COOL AIR INTAKE DUCT SEAL
5. REMOVE LOW PITCHED HORN ASSEMBLY




a. Remove the bolt and horn.
b. Disconnect the horn connector.

INSTALLATION

1. INSTALL LOW PITCHED HORN ASSEMBLY




a. Connect the horn connector.
b. Install the horn with the bolt.

Torque: 19 N.m (194 kgf.cm, 14 ft.lbf)

2. INSTALL COOL AIR INTAKE DUCT SEAL
3. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
4. INSTALL ENGINE ROOM SIDE COVER LH
5. INSTALL ENGINE ROOM SIDE COVER RH