Clearance Light Does Not Illuminate

Clearance Light does not Illuminate

Wiring Diagram:

Step 1-3:

Step 3 (Continued)-5:

Step 5 (Continued)-8:

Step 8 (Continued)-10:

Step 10 (Continued)-12:

Step 12 (Continued)-14:

Step 14 (Continued)-16:

Step 17:

INSPECTION PROCEDURE

NOTE:
- Check if DTC B2402 is output. If output, refer to the following procedures.
- Check if DTC B2482 is output. If output, refer to the following procedures.
- First perform the communication function inspections in HOW TO PROCEED WITH TROUBLESHOOTING to confirm that there are no CAN communication malfunctions before troubleshooting this symptom.