HI-Beam Headlight Does Not Illuminate

HI-beam Headlight does not Illuminate

Wiring Diagram:

Step 1:

Step 2-4:

Step 4 (Continued)-6:

INSPECTION PROCEDURE

NOTE:
- Check if DTC B2480 and B2481 are output by referring to the following procedures.
- Make sure that the headlight LO illumination is operating normally. If not operating normally, refer to the following procedures.
- First perform the communication function inspections in HOW TO PROCEED WITH TROUBLESHOOTING to confirm that there are no CAN communication malfunctions before troubleshooting this symptom.