Without Manufacturer's Scan Tool

DTC CLEAR
CLEAR DTC (without Intelligent Tester or Techstream)
(a) Turn the engine switch off.





(b) Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
SST 09843-18040

NOTICE: Do not connect the wrong terminals, as this will cause parts to be damaged.

(c) Within 5 seconds after turning the engine switch on (IG), push the electric parking brake switch to the lock side 5 times.

NOTICE: If the parking brake switch is pushed too fast, it may not respond. If it does not respond, perform the operation again and push the switch more slowly.

(d) Check that a normal system code is output.

HINT: If the malfunction continues, the DTC may not be clearable.