Rear Seat Inner Belt Assembly (For Power Seat)

Rear Seat Outer Belt Assembly (for Power Seat):

REAR SEAT INNER BELT ASSEMBLY (for Power Seat)

REMOVAL

1. REMOVE REAR SEAT ASSEMBLY
a. Remove the rear seat.

2. REMOVE REAR SEAT INNER BELT ASSEMBLY LH




a. Remove the bolt and seat belt.

3. REMOVE REAR SEAT INNER BELT ASSEMBLY RH
a. Use the same procedures described for the LH side.

4. REMOVE REAR SEAT INNER BELT ASSEMBLY CENTER




a. Remove the bolt and seat belt.

INSTALLATION

HINT: A bolt without a torque specification is shown in the standard bolt chart.

1. INSTALL REAR SEAT INNER BELT ASSEMBLY CENTER




a. Install the belt with the bolt.

Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)

NOTE: Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

2. INSTALL REAR SEAT INNER BELT ASSEMBLY LH




a. Install the belt with the bolt.

Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)

3. INSTALL REAR SEAT INNER BELT ASSEMBLY RH
a. Use the same procedures described for the LH side.

4. INSTALL REAR SEAT ASSEMBLY
a. Install the rear seat.