Wiper Blade: Service and Repair
Front Wiper Rubber:
FRONT WIPER RUBBER
REMOVAL
HINT:
- Use the same procedures for both the RH and LH sides.
- The procedures listed below are for the LH side.
1. REMOVE FRONT WIPER BLADE LH
a. Remove the wiper blade holder.
b. Remove the wiper blade as shown in the illustration.
2. REMOVE WIPER RUBBER LH
a. Detach the head part (large side) of the wiper rubber from the wiper blade.
b. Remove the wiper rubber in the direction indicated by the arrow in the illustration.
c. Remove the 2 wiper rubber backing plates from the wiper rubber.
INSTALLATION
HINT:
- Use the same procedures for both the RH and LH side.
- The procedures listed below are for the LH side.
1. INSTALL WIPER RUBBER LH
a. Install the 2 packing plates to the rubber.
NOTE: Install the packing plates facing the proper direction.
b. Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.
HINT: Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.
c. Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.
HINT: Push the wiper blade into the grooves of the wiper rubber to attach if completely.
2. INSTALL FRONT WIPER BLADE LH
a. Install the wiper blade as shown in the illustration.