Installation

2GR-FE FUEL: FUEL PRESSURE PULSATION DAMPER:

INSTALLATION

1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY






(a) Apply a light coat of spindle oil or gasoline to a new O-ring and install it to the fuel pressure pulsation damper.
(b) Install the fuel pressure pulsation damper to the fuel delivery pipe.
(c) Install the clip.
2. INSTALL INTAKE AIR SURGE TANK ASSEMBLY Installation

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

4. ADD ENGINE COOLANT Testing and Inspection

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSPECT FOR COOLANT LEAK Testing and Inspection

7. INSPECT FOR FUEL LEAK Testing and Inspection

8. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

9. INSTALL FRONT SUSPENSION CENTER UPPER BRACE
10. INSTALL ENGINE ROOM SIDE COVER RH Installation

11. INSTALL ENGINE ROOM SIDE COVER LH Installation

12. INSTALL COOL AIR INTAKE DUCT SEAL Installation