Removal

2GR-FE FUEL: FUEL PRESSURE PULSATION DAMPER:

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE
HINT: Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. DRAIN ENGINE COOLANT Testing and Inspection

4. REMOVE COOL AIR INTAKE DUCT SEAL Removal

5. REMOVE ENGINE ROOM SIDE COVER LH Removal

6. REMOVE ENGINE ROOM SIDE COVER RH Removal

7. REMOVE FRONT SUSPENSION CENTER UPPER BRACE
8. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

10. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

11. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY






(a) Remove the clip.
(b) Pull out the fuel pressure pulsation damper from the fuel delivery pipe.
(c) Remove the O-ring from the fuel pressure pulsation damper.