Installation

SEAT BELT: CHILD RESTRAINT SEAT TETHER ANCHOR:

INSTALLATION

1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET






(a) Install the 3 child restraint seat tether anchor brackets with the 3 bolts.
Torque: 21 Nm (214 kgf-cm, 16 ft-lbf)
2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) Installation

3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Installation

4. INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade) Installation

5. INSTALL REAR SEAT SHOULDER BELT HOLE COVER Installation

6. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH Installation

7. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation

8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Installation

9. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation

10. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH Installation

11. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag) Installation

12. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)
HINT: Use the same procedure for the RH side and LH side.

13. INSTALL REAR SEAT SIDE GARNISH LH (w/o Rear Seat Side Airbag) Installation

14. INSTALL REAR SEAT SIDE GARNISH RH (w/o Rear Seat Side Airbag) Installation

15. INSTALL REAR DOOR SCUFF PLATE LH Installation

16. INSTALL REAR DOOR SCUFF PLATE RH Installation

17. INSTALL REAR SEATBACK ASSEMBLY Installation

18. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
19. INSTALL REAR SEAT HEADREST ASSEMBLY
20. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)
22. PERFORM INITIALIZATION (w/ Rear Seat Side Airbag)
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

23. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag) Diagnosis System