Installation

2GR-FSE FUEL: FUEL PUMP RESISTOR:

INSTALLATION

1. INSTALL FUEL PUMP RESISTOR






(a) Install the fuel pump resistor with the bolt.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Install the ground wires with the 2 bolts.
Torque: 8.0 Nm (80 kgf-cm, 69 in-lbf)
(c) Connect the connector with the clamp.
2. INSTALL ENGINE ROOM SIDE COVER RH Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation