Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RESET SWITCH





(a) Engage the 2 claws to install the tire pressure warning reset switch to the lower instrument panel sub-assembly.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
4. INSTALL INSTRUMENT SIDE PANEL LH Installation
5. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
6. INSTALL FRONT DOOR SCUFF PLATE LH Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: Test Mode Procedure