Installation

1UR-FSE FUEL: FUEL RELIEF VALVE: INSTALLATION

INSTALLATION

1. INSTALL FUEL RELIEF VALVE ASSEMBLY





(a) Install a new gasket to the relief valve.
(b) Using a 14 mm deep socket wrench, install the relief valve to the No. 2 delivery pipe.
Torque: 40 Nm (408 kgf-cm, 29 ft-lbf)
NOTICE:
- Do not apply oil to the threads of the relief valve and delivery pipe.
- Do not allow foreign matter to enter the pipe during the installation.

(c) Install the No. 1 fuel pipe sub-assembly.





(d) Connect the No. 3 fuel hose.
2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation
3. INSTALL INTAKE MANIFOLD
(a) Install the intake manifold Installation.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. ADD ENGINE COOLANT Service and Repair
6. INSPECT FOR COOLANT LEAK Testing and Inspection
7. INSPECT FOR FUEL LEAK Testing and Inspection