Installation

SEAT BELT: CHILD RESTRAINT SEAT TETHER ANCHOR: INSTALLATION

1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

(a) Install the 3 child restraint seat tether anchor brackets with the 3 bolts.





Torque : 21 Nm (214 kgf-cm, 16 ft-lbf)

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) Installation

3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Installation

4. INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade) Installation

5. INSTALL REAR SEAT SHOULDER BELT HOLE COVER Installation

6. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH Installation

7. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation

8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Installation

9. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation

10. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH Installation

11. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY LH Installation

12. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

13. INSTALL REAR DOOR SCUFF PLATE LH Installation

14. INSTALL REAR DOOR SCUFF PLATE RH Installation

15. INSTALL REAR SEATBACK ASSEMBLY Installation

16. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

17. INSTALL REAR SEAT HEADREST ASSEMBLY

18. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

20. PERFORM INITIALIZATION

NOTICE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

21. INSPECT SRS WARNING LIGHT

Diagnosis System