Installation

SUSPENSION: FRONT LOWER SUSPENSION ARM: INSTALLATION

1. INSTALL FRONT SUSPENSION LOWER NO. 1 ARM

(a) Install the front lower arm bushing stopper to the front suspension lower No. 1 arm.

(b) Install the front suspension lower No. 1 arm to the front frame assembly with the 3 bolts and nut, but do not tighten them yet.

(c) Tighten the 3 bolts in numerical order shown in the illustration.





Bolt 1, 2 - Torque : 200 Nm (2,040 kgf-cm, 148 ft-lbf)

Bolt 3 - Torque : 135 Nm (1,377 kgf-cm, 100 ft-lbf)

2. INSTALL ENGINE MOUNTING INSULATOR

(a) Install the engine mounting insulator with the 3 nuts.





Torque : 87 Nm (887 kgf-cm, 64 ft-lbf)

3. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

HINT
Refer to the instructions for installation of the engine assembly with transaxle Installation.