Installation

EXTERIOR PANELS / TRIM: NAME PLATE: INSTALLATION

1. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the name plate (if reusing the door plate).

(1) Using a heat light, heat the door plate.

(2) Remove the double-sided tape from the door plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the door plate.

(c) Install the door plate.

(1) Using a heat light, heat the vehicle body and door plate.

(2) Remove the release paper from the door plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the door plate.

for IS250C plate:





Reference Measurement:





for IS350C plate:





Reference Measurement:





2. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the name plate (if reusing the name plate).

(1) Using a heat light, heat the name plate.

(2) Remove the double-sided tape from the name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the name plate.

(c) Install the name plate.

(1) Using a heat light, heat the vehicle body and name plate.

(2) Remove the release paper from the name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate.





Reference Measurement:





3. INSTALL SYMBOL EMBLEM

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the emblem (if reusing the emblem).

(1) Using a heat light, heat the emblem.

(2) Remove the double-sided tape from the emblem.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the emblem.

(c) Install the emblem.

(1) Using a heat light, heat the vehicle body and emblem.

(2) Remove the release paper from the emblem.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the emblem.





Text in Illustration