Installation

FRONT SUSPENSION: FRONT UPPER SUSPENSION ARM: INSTALLATION

HINT
* Use the same procedure for the LH side and RH side.
* The following procedure is for the LH side.

1. INSTALL FRONT UPPER SUSPENSION ARM ASSEMBLY

(a) Temporarily install the front upper suspension arm assembly with the 2 bolts.





HINT
When installing the front upper suspension arm assembly, temporarily tighten the bolts at the position shown in the illustration.

(b) Fully tighten the front upper suspension arm assembly with the 2 bolts.





Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)

2. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

(a) Refer to the procedure from Temporarily Tighten Front Shock Absorber with Coil Spring Installation.