Installation

EXTERIOR: NAME PLATE: INSTALLATION

HINT
When installing the symbol emblem or name plate, heat the vehicle body and symbol emblem or name plate using a heat light.

Heating temperature:





NOTICE:
Do not heat the vehicle body and name plate excessively.

1. INSTALL SYMBOL EMBLEM

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the symbol emblem. (If reusing the symbol emblem)

(1) Using a heat light, heat the symbol emblem.

(2) Remove the double-sided tape from the symbol emblem.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the symbol emblem.

(c) Install the symbol emblem.





(1) Using a heat light, heat the vehicle body and symbol emblem.

(2) Remove the release paper from the symbol emblem.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the symbol emblem.

2. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the name plate. (If reusing the name plate)

(1) Using a heat light, heat the name plate.

(2) Remove the double-sided tape from the name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the name plate.

(c) Install the name plate.





(1) Using a heat light, heat the vehicle body and name plate.

(2) Remove the release paper from the name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate.

3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the name plate. (If reusing the name plate)

(1) Using a heat light, heat the name plate.

(2) Remove the double-sided tape from the name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the name plate.

(c) Install the name plate.





(1) Using a heat light, heat the vehicle body and name plate.

(2) Remove the release paper from the name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate.