Installation

LIGHTING: GLOVE BOX LIGHT: INSTALLATION

1. INSTALL GLOVE BOX LIGHT ASSEMBLY

(a) Install the glove box light assembly as shown in the illustration.





2. INSTALL LOWER INSTRUMENT PANEL RH Installation

3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

4. INSTALL SIDE INSTRUMENT PANEL RH Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL FRONT DOOR OPENING TRIM COVER RH Installation

7. INSTALL FRONT DOOR SCUFF PLATE RH Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

10. INSPECT SRS WARNING LIGHT

Diagnosis System

11. PERFORM INITIALIZATION

NOTICE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.