Installation

2GR-FE EMISSION CONTROL: CANISTER: INSTALLATION

1. INSTALL CHARCOAL CANISTER ASSEMBLY

(a) Install the 2 bolts, clip and charcoal canister.





Torque : 39 Nm (398 kgf-cm, 29 ft-lbf)

(b) Connect the purge line hose to the charcoal canister.

(c) Connect the wire harness clamp.

(d) Connect the vapor pressure sensor connector.

(e) Connect the charcoal canister filter sub-assembly to the charcoal canister.





(f) Connect the fuel tank vent hose to the charcoal canister.





2. INSTALL FUEL TANK ASSEMBLY

HINT
Installation