Installation

PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION

1. INSTALL CABLE SUPPORT BRACKET

(a) Install the cable support bracket with the 2 nuts.





Torque : 76 Nm (775 kgf-cm, 56 ft-lbf)

2. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Install the 2 cable support brackets to the No. 3 parking brake cable assembly.





Text in Illustration





(b) Install the No. 3 parking brake cable assembly to the cable support bracket with the 2 nuts.





Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Install the No. 3 parking brake cable assembly to the body with the 2 bolts and 2 clamps.





Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)

3. INSTALL NO. 2 DIFFERENTIAL SUPPORT PROTECTOR Installation

4. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY

HINT
Use the same procedure as for the No. 3 parking brake cable assembly.

5. INSTALL NO. 1 DIFFERENTIAL SUPPORT PROTECTOR

HINT
Use the same procedure as for the No. 2 differential support protector.

6. INSTALL PARKING BRAKE SHOE LEVER SUB-ASSEMBLY

HINT
Refer to the procedure from Install Parking Brake Shoe Lever Sub-assembly Reassembly.

7. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for Manual Transmission)

(a) Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly, and install the clip to the No. 1 parking brake cable assembly.





Text in Illustration





(b) Install the No. 1 wire adjusting nut to the parking brake lever sub-assembly.

(c) Bend the claw of the parking brake lever sub-assembly to hold the No. 1 parking brake cable assembly.

8. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for Automatic Transmission)

(a) Pass the No. 1 parking brake cable assembly through the parking brake control pedal assembly, and install the clip to the No. 1 parking brake cable assembly.





Text in Illustration





(b) Install the No. 1 wire adjusting nut to the parking brake control pedal assembly.

(c) Bend the claw of the parking brake control pedal assembly to hold the No. 1 parking brake cable assembly.

9. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY (for Manual Transmission)

HINT
Refer to the instructions for Installation of the parking brake lever sub-assembly Installation.

10. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for Automatic Transmission)

HINT
Refer to the instructions for Installation of the parking brake control pedal assembly Installation.