Removal

LIGHTING (INT): GLOVE BOX LIGHT: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Repair Instruction - Initialization.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Service Precautions.

3. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side Removal.

4. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal

5. REMOVE INSTRUMENT SIDE PANEL RH Removal

6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

9. REMOVE GLOVE BOX LIGHT ASSEMBLY

(a) Disengage the 2 claws and remove the glove box light assembly.