Installation

SEAT BELT: CHILD RESTRAINT SEAT TETHER ANCHOR: INSTALLATION

1. INSTALL TETHER ANCHOR BRACKET SET

(a) Install tether anchor bracket set with the bolt.





Torque : 21 Nm (214 kgf-cm, 16 ft-lbf)

2. INSTALL ROLL OVER GARNISH LH Installation

3. INSTALL REAR PACKAGE TRAY END PLATE (for LH Side) Installation

4. INSTALL FRONT PACKAGE TRAY TRIM BOARD Installation

5. INSTALL REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY Installation

6. INSTALL PACKAGE TRAY TRIM GARNISH LH Installation

7. INSTALL PACKAGE TRAY TRIM GARNISH RH Installation

8. CONNECT REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY LH Installation

9. CONNECT REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY RH Installation

10. INSTALL REAR SEAT CUSHION ASSEMBLY LH Installation

11. INSTALL REAR SEAT CUSHION ASSEMBLY RH Installation

12. CLOSE METALTOP ROOF Installation