Fuel Door Release Cable: Service and Repair

FUEL-FILLER LID OPENER REMOVAL/INSTALLATION

1. To remove the fuel-filler lid opener, remove the following procedure:
- 5 door




- Remove the hole cover on the trunk side trim. (RH)

- 4 door
- Remove the trunk end trim
- Slightly bend back the trunk side trim. (RH)

2. To remove the fuel-filler lid opener lever, remove the following part:
1. Front scuff plate (Driver's side)

3. When removing the fuel-filler lid opener cable, perform the following procedure:
1. Remove the following parts:
1. Rear seat
2. Rear scuff plate (Driver's side)
3. Tire house trim (Driver's side)
4. B-pillar lower trim (Driver's side)

2. Partially peel back the floor covering so that the fuel-filler lid opener cable can be removed.
3. Remove the fuel-filler lid opener cable from clips A.




4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.