Joint Shaft Disassembly/Assembly

JOINT SHAFT DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.





Joint Shaft Disassembly Note





1. Remove the joint shaft using the SST and a press.

Bearing Disassembly Note





1. Remove the bearing and the dust seal (RH/LH) using the SSTs.





2. If the bearing remains on the joint shaft, set the SST and joint shaft to the press.

Dust Seal (RH) Assembly Note
1. Apply grease to a new dust seal lip.





2. Install the dust seal (RH) using the SSTs.

Bearing Assembly Note





1. Install a new bearing using the SSTs.

Dust Seal (LH) Assembly Note





1. Apply grease to a new dust seal lip.
2. Install a new dust seal (LH) using the steel plate and the SSTs.

Joint Shaft Assembly Note





1. Press fit the joint shaft using the SST and a press.