Removal and Installation

REMOVAL AND INSTALLATION

CAUTION: The rear hub unit bearing should not be dismantled.

REMOVAL SERVICE POINTS
[[A]] CALIPER ASSEMBLY REMOVAL
Remove the caliper assembly and suspend it with a wire.

[[B]] ABS ROTOR REMOVAL





Use special tool MB991248 to remove the ABS rotor.

[[C]] BACKING PLATE REMOVAL
Remove the backing plate and suspend it.

INSTALLATION SERVICE POINT
]]A[[ ABS ROTOR INSTALLATION





Install the ABS rotor as shown in the illustration.

INSPECTION
^ Check the oil seal for crack or damage.
^ Check the ABS rotor for chipped teeth.