Steering Angle Sensor: Service and Repair

REMOVAL AND INSTALLATION

WARNING: Before removing the steering wheel and air bag module assembly, refer to Service Precautions and Air Bag Module and Clock Spring.

NOTE: For details on the ABS sensor, refer to On-vehicle Service.

REMOVAL SERVICE POINT
[[A]] STEERING WHEEL SENSOR REMOVAL





CAUTION: Make sure no oil adheres to the steering wheel sensor because a photocoupler is used. Remove the steering wheel sensor from the column switch.

INSPECTION
ELECTRIC PUMP RELAY CONTINUITY CHECK





1. Using a jumper wire, connect a battery (±) to terminal No.2 of the electric pump relay and battery (-) to terminal No.1.





2. While intermittently disconnecting the jumper wire at the battery side, check for continuity between terminals No.3 and No.4 of the electric pump relay.








ACD MODE CHANGEOVER SWITCH CONTINUITY CHECK