Overhaul

DISASSEMBLY AND ASSEMBLY

Disassembly Steps 1 - 15:

DISASSEMBLY SERVICE POINT

]]A[[ RIVETS REMOVAL






Use a drill (dia 4.0 mm) to make a hole in the rivet to break it, and remove the rivet.

REASSEMBLY SERVICE POINT

]]A[[ RIVETS INSTALLATION






Use a rivet tool shown in the illustration to connect the parts with rivets by the following procedures.

1. Insert the rivet into a corresponding location.
2. Set the rivet tool at a section A of rivet.
3. While pushing the flange surface of the rivet onto parts to be fixed with the rivet tool, press the handle of the tool.
4. Thin part of section A of the rivet will be cut off and the parts is fixed in position.