Front Suspension

LOWER ARM REAR BUSHING REPLACEMENT





Replace the back side bushing according to the following procedure.





1. Use the following special tools to remove the bushing:
^ MB992119 (Arm bushing remover and installer)
^ MB990979 (ring)
^ MB990890 (Rear suspension bushing base)





2. Use the following special tools to press-fit the bushing:
^ MB992119 (Arm bushing remover and installer)
^ MB990979 (ring)
^ MB990890 (Rear suspension bushing base)

3. Press-fit the bushing so that the bushing protrusion is in the direction shown in the figure.
4. Press-fit the bushing until the special tool contacts with the lower arm assembly.