Work Procedure

ADDITIONAL SERVICE WHEN REPLACING ECM

Work Procedure


1. PERFORM INITIALIZATION OF NVIS (NATS) SYSTEM AND REGISTRATION OF ALL NVIS (NATS) IGNITION KEY IDS
Work Procedure.
- GO TO 2.

2. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING

Work Procedure.
- GO TO 3.

3. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING

Work Procedure.
- GO TO 4.

4. PERFORM IDLE AIR VOLUME LEARNING

Refer toWork Procedure.
- GO TO 5.

5. PERFORM G SENSOR CALIBRATION

Work Procedure.
- END