Work Procedure

UNIT CHARACTERISTICS WRITING

Work Procedure


1. UNIT CHARACTERISTICS WRITING

With CONSULT





1.Confirm the unit characteristics (A and B) of electric controlled coupling (left and right).
NOTE:
- This illustration is sample.
- For the illustration, the unit characteristics are following.

Left side: 3B4D66BBE32B
Right side: 3B4D66BBE318

2.Turn the ignition switch OFF to ON.
3.Select "UNIT CHARACTERISTICS WRITE" in "WORK SUPPORT" for "ALL MODE AWD/4WD".
4.Input unit characteristics.
5.Select "Start".
6.Check that "UNIT CHARACTERISTICS WRITE COMPLETED" is displayed.
- WORK END