Rear Washer Nozzle And Tube

REAR WASHER NOZZLE AND TUBE

Removal and Installation


REMOVAL

1.Remove luggage side upper finisher RH. Luggage Side Upper Finisher.





2.Disconnect rear washer tube (2) fixing clip and then remove rear washer tube joint (2) from rear washer tube.

Broken circle indicates : Clip

3.Fully open back door.





4.Remove back door seal rubber (2), and then remove rear washer tube (3) from back door seal rubber.
5.Remove plug (1).





6.Disengage rear washer nozzle (1) fixing pawl with a flat-bladed screwdriver (A) and remove the rear washer nozzle.

CAUTION:
Wrap the flat-bladed screwdriver into a protective tape (B)
to protect the part from damage.
7.Remove rear washer nozzle from the rear washer tube.

INSTALLATION

Install in the reverse order of removal.