Radio Replacement

REMOVAL PROCEDURE
1. Remove the center trim plate.
2. Remove the fasteners (3) that retain the radio to the instrument panel.
3. Remove the radio (2) from the instrument panel assembly.
4. Disconnect the electrical connectors (1).
5. Disconnect the antenna lead (6) from the radio.

INSTALLATION PROCEDURE
1. Connect the electrical connectors (1).
2. Connect the antenna lead (6) to the radio.
3. Install the radio (2) to the instrument panel assembly.

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Install the fasteners (3) in order to retain the radio to the instrument panel.

Tighten
Tighten the fasteners to 1.9 N.m (17 lb in).

5. Install the center trim plate.