| Camshaft | Primary Drive Type | Endless Chain |
| Adjustment | Hydraulic, Automatic |
| Pitch | 10.315 inch |
| Width | Single Row |
| Secondary Drive Type | Endless Chain |
| Adjustment | Direct Acting Hydraulic |
| Pitch | 10.315 inch |
| Width | Single Row |
| Camshaft Material | Hardened Cast Grey Iron |
| Bearing Number | 5 |
| Bearing Number on Left Hand Intake | 6 |
| Bearing Journal Diameter | 1.061 - 1.062 Inch (in) |
| Bearing Bore Diameter (in Head) | 1.064 inch |
| Bearing Clearance | 0.002 - 0.003 Inch (in) |
| New Limits | 0.002 - 0.004 inch |
| Worn Limits (Not Over) | 0.006 inch |
| Out-of-Round (Not Over) | 0.0009 Inch (in) |
| Valve Timing (With Ramp at 0.100 mm Lift), Intake Opens | 9 Degrees Before Top Dead Center (deg BTDC) |
| Intake Closes | 55 Degrees After Bottom Dead Center (deg ABDC) |
| Exhaust Opens | 51 Degrees Before Bottom Dead Center (deg BBDC) |
| Exhaust Closes | 13 Degrees After Top Dead Center (deg ATDC) |
| Valve Lift-intake | 0.339 Inch (in) |
| Valve Lift-Exhaust | 0.339 Inch (in) |
| Duration (@ 0.100 mm Lift)-Intake | 244 Degrees (deg) |
| Duration (@ 0.100 mm Lift)-Exhaust | 244 Degrees (deg) |
| Valve Overlap (@ 0.100 mm Lift) | 22 Degrees (deg) |