Front

REMOVAL PROCEDURE

^ Tools Required
- J24319-B Universal Steering Linkage Puller.





1. Raise the vehicle. Support the vehicle by the frame. Allow the control arms to hang free. Refer to Vehicle Lifting.
2. Remove the front wheels and tires.
3. Remove the left and the right stabilizer link bolts.

INSTALLATION PROCEDURE





1. Loosely install the stabilizer link components.
Tighten the stabilizer link nuts to 17 Nm (13 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the front wheels and tires.
Tighten the wheel nuts to 140 Nm (100 ft. lbs.).
3. Lower the vehicle.