Installation Procedure

1. Install the generator through the top left side of the engine compartment.

2. Install the air inlet duct.

3. Install the lower generator bolts.
Tighten
Tighten the lower generator bolts to 38 Nm (28 lb ft).

4. Install the [1][2]ground strap.

5. Install the power steering line bracket.





6. Install the generator mounting bolts.
Tighten
Tighten the generator mounting bolts to 47 Nm (35 lb ft).

7. Install the generator output terminal nut.
Tighten
Tighten the generator output terminal nut to 20 Nm (15 lb ft).





8. Connect the voltage regulator connection.

9. Install the accessory drive belt.

10. Install the radiator. Refer to Radiator Replacement in Engine Cooling.

11. Connect the negative battery cable.

12. Install the rear seat cushion. Refer to Seats and Carpet.