AT Mount Replacement (Left)

Removal Procedure
1. Raise the vehicle. Support the vehicle. Refer to Vehicle Lifting.
2. Remove the bolt attaching the mount to the frame.





3. Remove the transmission to engine brace.
4. Remove the bolts attaching the mount to the transmission.





5. Remove the front transmission mount and the oil cooler bracket.

Installation Procedure





1. Install the front transmission mount and the oil cooler bracket to the transmission.

Notice: Refer to Fastener Notice in Service Precautions.

^ Tighten the bolts to 58 Nm (43 ft. lbs.).





2. Install the through bolt attaching the mount to the frame.
^ Tighten the bolts to 85 Nm (63 ft. lbs.).
3. Install the transmission to engine brace.
4. Remove the support stands.
5. Lower the vehicle.