AT Mount Replacement (Right)

Removal Procedure
1. Remove the transmission to cylinder head brace nuts.
2. Raise the vehicle. Support the vehicle. Refer to Vehicle Lifting.
3. Remove the front exhaust pipe. Refer to Exhaust System.
4. Remove the steering rack retaining bolts.
5. As necessary, position the steering rack away from the mount.
6. Support the transmission with the transmission jack.
7. Remove the through bolt and the nut.
8. Remove the mount-to-frame nuts and bolts.





9. Remove the mount from the frame.
10. Remove the mount-to-transmission bolts.
11. Remove the mount from the transmission.

Installation Procedure





1. Install the mount to the transmission.

Notice: Refer to Fastener Notice in Service Precautions.

^ Tighten the bolts to the transmission to 110 Nm (81 ft. lbs.).
2. Install the mount to the frame.
^ Tighten the mount-to-frame nuts and bolts to 73 Nm (54 ft. lbs.).
3. Install the mount through bolt and nut.
^ Tighten the through bolt to 102 Nm (75 ft. lbs.).
4. Remove the transmission jack.
5. Install the steering rack.
6. Install the front exhaust pipe. Refer to Exhaust System.
7. Install the transmission to cylinder head brace nuts.
8. Lower the vehicle.