Radiator Hose Replacement - Outlet

REMOVAL PROCEDURE

^ Tools Required
J 38185 Hose Clamp Pliers





1. Partially drain the engine coolant from the cooling system.
2. Remove the left diagonal brace.
3. Disconnect the inlet hose from the radiator using the J 38185.





4. Disconnect the inlet hose from the thermostat housing using the J 38185.
5. Remove the inlet hose.


INSTALLATION PROCEDURE





1. Install the inlet hose in position and align the marks on the hose.
2. Use J 38185 in order to remove the inlet hose clamp from the radiator.





3. Connect the inlet hose to the radiator using the J 38185.
4. Install the left diagonal brace.
5. Fill the cooling system with engine coolant.
6. Inspect for leaks.