Installation Procedure

1. Install the Inflatable Restraint Steering Wheel Module Coil to the steering shaft (2).
2. Install the retaining ring (3).
3. Center the Inflatable Restraint Steering Wheel Module Coil. 4. Route the lower coil wire harness along the steering column jacket.
5. Install the wire harness straps to the steering column wire harness.
6. Install the steering wheel.
7. Install the Inflatable Restraint Steering Wheel Module.
8. Install the upper and lower shrouds.
9. Connect the Inflatable Restraint Steering Wheel Module Coil yellow 2-way wiring harness connector at the base of the steering column.
10. Install the Connector Position Assurance (CPA) to the Inflatable Restraint Steering Wheel Module Coil yellow 2-way wiring harness connector at the base of the steering column.
11. Enable the SIR System.