A/T Range Selector Cable Bracket Replacement

Removal Procedure





1. Remove the throttle body air inlet duct. Refer to Air Cleaner Intake Duct Replacement in Powertrain Management.
2. Remove the automatic transaxle range selector cable from the automatic transaxle range selector lever.





3. Remove the automatic transaxle range selector cable from the automatic transaxle range selector cable bracket.





4. Remove the automatic transaxle range selector cable bracket bolts.
5. Remove the automatic transaxle range selector cable bracket.


Installation Procedure





1. Install the automatic transaxle range selector cable bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the automatic transaxle range selector cable bracket bolts.
^ Tighten the automatic transaxle range selector cable bracket bolts to 25 Nm (18 ft. lbs.).





3. Install the automatic transaxle range selector cable to the bracket





4. Install the automatic transaxle range selector cable to the automatic transaxle range selector lever.
5. Adjust the automatic transaxle range selector cable if necessary. Refer to A/T Range Selector Cable Adjustment.
6. Install the throttle body air inlet duct. Refer to Air Cleaner Intake Duct Replacement in Powertrain Management.