Instrument Panel Compartment - Door Latch Replacement

Instrument Panel Compartment Door Latch Replacement

Removal Procedure

1. Remove the IP storage compartment. Refer to Instrument Panel Storage Compartment Replacement (Service and Repair).




2. Disconnect the lever rod (2) from the handle and latch.
3. Remove the fasteners that secure the IP compartment latch (1) to the door.
4. Remove the latch assembly from the door.

Installation Procedure

Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the IP compartment latch (1) and fastener clip.

Tighten the fasteners to 1.4 Nm (12 lb in).




2. Connect the lever rod (2) from the handle and latch.
3. Install the IP storage compartment. Refer to Instrument Panel Storage Compartment Replacement (Service and Repair).