Brake Caliper Bracket Overhaul

Brake Caliper Bracket Overhaul

1. Remove the brake caliper.
2. Remove the brake caliper bracket.





3. Mount the brake caliper bracket (13) in a vise.
4. Remove the pin bolt boots (4) from the brake caliper bracket (13).





5. Remove the bushings (2) from the brake caliper bracket mounting bores. Use a screwdriver or punch to bend the bushings inward and extract bushings with needle nose pliers.

Important:
^ Clean all parts with clean denatured alcohol. Dry with non-lubricated compressed air.
^ Inspect the brake caliper bracket for cracks. If cracked, replace bracket.

6. Lubricate and install new bushings into bracket mounting bores.
7. Lubricate and install new pin bolt boots onto the brake caliper bracket.
8. Install the brake caliper bracket onto the vehicle.
9. Install the brake caliper.