Brake Caliper Bracket Replacement - Front

Brake Caliper Bracket Replacement - Front

Removal Procedure

1. Remove the caliper.
2. Remove the brake pads from the brake caliper bracket.





3. Remove the brake caliper bracket bolts (1).
4. Remove the brake caliper bracket.

Installation Procedure

Important: Apply a few drops of GM Loctite(tm) or equivalent to the threads of the brake caliper bracket bolts before installing or replace the bolts with new pre-coated bolts.

1. Install the brake caliper bracket to the steering knuckle.

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the brake caliper bracket bolts (1).
Tighten the brake caliper bracket bolts to 185 Nm (137 lb ft).
3. Install the brake caliper.