Cruise Control Servo Cable: Service and Repair

CRUISE CONTROL CABLE REPLACEMENT

REMOVAL PROCEDURE

IMPORTANT: Note the cable routing for replacement.




1. Disconnect the cruise control cable from the throttle body cam (1).
2. Disconnect the cruise control cable from the throttle body bracket.




3. Twist the cruise control cable housing counter clockwise in order to release the cable housing from the cruise control module.




4. Disconnect the cruise control cable ball stud (1) from the actuator strip (2) on the cruise control module.




5. Remove the cable from the retainer (2).

INSTALLATION PROCEDURE




1. Install the cruise control cable ball stud (1) into the slot in the cruise control module actuator strip (2).
2. Insert the cruise control cable housing into the cruise control module and twist clockwise to secure.




3. Connect the cruise control cable to the throttle body cam (1).
4. Snap the cable clip (3) to the throttle body bracket.




5. Install the cable into the retainers (2).
6. Adjust the cruise control cable. Refer to Cruise Control Cable Adjustment (W/L47) or Cruise Control Cable Adjustment (W/LX5).

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes