Air Distribution Duct Replacement

REMOVAL PROCEDURE




1. Remove the left side sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges and Warning Indicators.
2. Remove the right side sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.
3. Remove the console assembly. Refer to Console Replacement - Front Floor in Instrument Panel, Gauges and Warning Indicators.
4. Remove the air distributor duct screws (1,2). Due to the difficulty in the removal of the right side screw (2), it will not be necessary to install upon reassembly.
5. Remove the air distributor duct.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the air distributor duct and the left screw (1) ensure the right tab is seated properly.

Tighten
Tighten the screw to 1.4 N.m (12 lb in).

2. Install the left side sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges and Warning Indicators.
3. Install the right side sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.
4. Install the console assembly. Refer to Console Replacement - Front Floor in Instrument Panel, Gauges and Warning Indicators.