Defroster Duct Replacement - Windshield

DEFROSTER DUCT REPLACEMENT - WINDSHIELD

REMOVAL PROCEDURE




1. Remove the IP assembly. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Warning Indicators.
2. Remove the defroster duct retaining screws (1, 2).
3. Remove the defroster duct nut from the front of dash (3).
4. Remove the defroster duct.

INSTALLATION PROCEDURE




1. Install the defroster duct.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the module attaching screws (1 2).

Tighten
Tighten the screws to 1.4 N.m (12 lb in).

3. Install the defroster duct mounting nut (3) to the front of dash.

Tighten
Tighten the nut to 9 N.m (80 lb in).

4. Install the IP assembly. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Warning Indicators.